The air shower room is set in the clean area and the buffer area of the clean area in the non-clean area and the clean area. It will also enter the dust of the cleaning surface and blow the hair to prevent the pollution source from entering the clean area, thus ensuring the cleaning area and sterility of the goods and cleaning production. All air supply and shower rooms, after electricity, can be used for customers'goods. But there are also some customers because of site constraints, the machine can not enter, such air shower room needs to be installed in the field.

Air shower room is divided into the following several, air shower chassis, on both sides of the air shower box, air shower box, doors and some electrical control.

(1) Air shower chassis in air shower room is usually made of stainless steel tube with a thickness of 40 mm. The chassis is made up of a whole body. Firstly, the air shower chassis device is located in the direction of the air shower device. Air shower chassis does not need to be fixed with the ground, and can maintain its own weight. Usually single air shower room is 350 kg, 650 kg double air shower room.

(2) The chassis is arranged in the side box body of the air shower chamber. In Xi'an, the chassis and the bottom of the chassis are fixed with self-tapping screw or rivet. Here we should pay attention to the orientation of the chassis and the side box body.

(3) The rear of the air shower room is fixed to the side of the car, and the front device is connected on both sides of the box body. There is a need for attention to the straightness and continuous measurement to ensure that the scale of the lower part of the rack is completely consistent.

(4) Complete the whole structure, then install doors, doors and frames are reinforced by stainless steel pipes and stainless steel hinge three stainless steel hinges. The original doorframes and doorboards have been installed before the manufacturer leaves the factory. At this point, the hinges are fixed to the side of the shower. If the door is insufficient conflict between the door frame and the box groove, it is because of the uneven horizon, this step does not need to adjust the structure, just need to straighten the wind and rain in the lower part, the air shower chassis cushion can be. Repeatable debugging of the corner pad once the door body of the refrigerator will be completely regular box gap.

(5) The lighting and electrical appliances of the air shower chamber and the electrical outlets of the air shower chamber are fast. Only the corresponding sockets, Rexroth electric locks and infrared photoelectric devices are required to illuminate the air shower chamber at the corresponding interfaces.

(6) Power of air shower chamber: three-phase five-wire, three-wire, one-zero line and line of air shower chamber. If the wind is very small after the power supply, usually for the fan rotation. It only needs to communicate the three arbitrary directions of the line and normal operation.

(7) Blue liquid crystal display air shower control panel and screen maintenance, easy to purify the factory air shower control panel unlocking method only requires the triple keys of "and + lighting" to hear "drops" twice, air shower time, lighting time, can always set the screen maintenance program.

(8) There are many sealants for the air shower room of the demand device. Simple Dawning is usually sealed with sealant, which is environmentally friendly and odorless. Through the above seven processes, the air shower room has been installed, and now it can be used. With the use and attention, the air shower room and electronic interlocking function, one door opened, the other door can not open, in the process of operation, the two doors can not be used in the process of being opened. Never push or pull the door hard to avoid damaging the door.