The main work of the air shower room is that it needs to be applied in the field. The reason for the filter is that it passes through the test point. It is qualified. It needs to be tested when it leaves the factory. Qualified standard use. On-site detection and detection of the impact of filtering. In this detection process, it does not meet the standard. The reason for inefficiency is that it does not meet certain requirements. For air shower, the selection of filter is very important, so how to judge whether the air shower is qualified?

The reason why the filter itself is inefficient is that it does not meet the requirements. The causes and effects of filtering have been defined. When we check whether it is qualified, it is necessary to look at the requirements of the air shower room. This generation is closely related to working hours, so the role of zoning is also a key factor in controlling raw materials. The production environment of the filter and the filter itself also have time in the detection process. If not detected, it will not play any role.

In our filter material, it is difficult to see the damage of the filter material with the naked eye. A small amount of damage is easier to repair. After repair, it will play a role in the production of filters. For some damage that needs to be filtered, it is invisible to the naked eye. It can be seen from the test. Such a problem will cause damage to the operation of the wind shower, but it will not occur after repair.